Asbestos Fibre Jointing Sheets, Non Asbestos Fibre Jointing Sheets, Rubber Sheets, Graphite Products
   





 
 
     
   
     
   
 
 
V. DIPESH KUMAR & CO. OFFERS RANGE

INSULATING MAT

FOR ELECTRICAL PURPOSE :
( IS : 15652/2006)
GENERAL PURPOSE RUBBER HOLOMAT  
Universal Pattern
Square / Taper Edge
Available Sizes :
Length Width Thickness
1550 1050 22 mm
1500 1000 22 mm
1230 830 22 mm
1200 800 22 mm
1000 750 22 mm
1000 500 22 mm
800 600 22 mm
600 400 22 mm
1210 810 16 mm
1200 800 16 mm
800 600 16 mm
800 400 16 mm
600 400 16 mm
Application : Human safty is prime concern of the mat developed for electrical purpose and shall be used as floor convering for the protection of workers AC & DC installations with the system voltages upto 66 KV as & 240V dc

Construction :
Insulating Mat made from highly electrical resistant elastomer resistant elastomer, free from any insertions

Surface :
Upper surface of the mat is having small anti-skid aberration marks (rough surface without edges) to avoid slippery effects and lower surface is plane.

Dimension :
Length and Width : Standard sizes are 1Mtr.×2Mtr. and 1.2Mtr.×2.4Mtr.

Thickness :
Thickness as per classification & designation
Class of Mat Thickness (mm) Tolerance (%) Ac (rms) kV Dc (rms) V
A 2.00 ±10 3.3 240
B 2.50 ±10 11 240
C 3.00 ±10 33 240
D 3.50 ±10 66 240
Electrical Properties & Voltage test :
Class of Mat Thickness (mm) Di-electric Strength ac (rms) kV Proff Voltage ac (rms) kV
A 2.00 30 10
B 2.50 45 22
C 3.00 65 36
D 3.50 110 70
Working Temp. Mats :
-10 to 55°C
Silent Features of the Mats :
  1. Flame Retation
  2. Low Temperature Resistant
  3. Acid / Alkalis & Oil Resistant
  4. Insulation Resistant with water
  5. Low Leakage Current
Areas of application / use :
  1. All kind of electric Sub-stations
  2. Transformers Rooms
  3. Lift Machine Rooms
  4. Switch Rooms
  5. Electric Panels
  6. AC Plant Rooms
  7. X-RAy Plant Rooms
  8. LT / HT Labs
  9. Around Bus Bars
  10. Generator Rooms, etc
Recommendation for Use of Mats :
  • For obtaining max. practical safety in adverse working conditions, the mat should be permanently pasted with the hepl of suitable adhesive / resin.
  • All joints and covers shall be filled / covered with insulating materials of matching colors.
  • Joints waterproofing compound should be used to protect insulating & electrical properties from moisture.
  • Contact with petrol / diesel / paraffin or white spirit and strong acid / alkalis should be avoided.
 
Asbestos & Non-Asbestos Packings
Asbestos Textile & Ceramic Products for Heat Insulation
Pure / Filled PTFE / PTFE Products
Graphite & Carbon Products
Plastic Products & Engineering Plastic
VD Seal Non Asbestos & Fluid Seal products
VD Seal PTFE Expanded Tape / Rope

Champion Spitmaan Charminar Caf Sheets Asbestos Packing Non-Asbestos Packings Asbestos Textile & Ceramic Products for Heat Insulation
Pure / Filled PTFE / PTFE Products PTFE Thread Seal Gaskets for Flanges / Cork Products
Fiber Products Nylon Products Polyurethane Products Rubber Sheets & Parts
Rubber Mats Graphite & Carbon Products Plastic Products & Engineering Plastic VD Seal Non Asbestos & Fluid Seal products
VD Seal PTFE Expanded Tape / Rope Castable Polyurethane Products Insulating Mat PTFE Scraps
Anti Vibration Mount / Pads U Seals Wipers Seals Circlips / Snap Rings
Bucket Seals / Cup Seals Bonded Seals /Dowty Seals PTFE Backup Rings / Machined Components Chevron Packing
Wiper Strips Mechinical Seals V Seals Oil Seals
‘O’ Rings Diaphragms Wires Cables Cross Linking PTFE Seal Tape

-
-
-
-
-
  V.DIPESH KUMAR & CO. © 2009
Designed & Hosted by : MID   Promoted by : GID