Style No.

Temperature

 "SPITMAAN"

(Centigrade)

1500
SOLVA

4250

Asbestos packing manufactured from high grade asbestos yarn impregnated with oil resisting synthetic compound by a controlled process during which each strand is treated with fine graphite and a special grade of lubricant suited for hot and cold oils, solvents, aromatic hydrocarbons, petroleum distillates and oil refinery services.
Please specify when the rod or shaft is STAINLESS STEEL

 1513

5000

Asbestos-reinforced brass wire packing treated with oil resisting synthetic compound having suitable lubricant. Incorporation of brass wire improves strength an~ anti-friction properties. Best suited for petrochemical applications under high pressure conditions. Please indicate specifically when the rod is STAINLESS STEEL

1490

3000

Special grade of asbestos DUPLEX BRAIDED packing suitably lubricated and treated with graphite to withstand caustic liquors, including caustic potash, soda, lime, ammonia and sulphides. An ideal packing for paper mill applications. PH 4 - 12

1094

-1500 to +3000

High grade asbestos fibre yarn DUPLEX BRAIDED packing impregnated with special PTFE suspensoid for severe caustic and other corrosive chemical, solvents, oils and petroleum byproducts and oxygen service. PH 2 - 12.

 1603

-1500 to +3000

A combination packing with specially selected fluoropolymer PTFE fibre and chemical resistant inorganic fibre yarn for resisting against corrosive medium and concentrated acids. This construction improves the strength and chemical inertness of the packing. This combination packing is further treated with PTFE suspensoid. This packing can be used against acids, chlorine, in valves, pumps having chrome plated or stainless steel shafts. PH 2 - 14.

1003

-1500 to +3000

A combination packing concentrically braided with special compound to resist hot concentrated alkalies, organic and dilute acids. A very special low friction packing recommended to be used with high speed pumps, agitator shafts, oils, solvents, ammonia solution, concentrated caustics and ketones. PH 2 - 12.

1

-2000 to +2900

A combination packing concentrically braided with special compound to resist hot concentrated alkalies, organic and dilute acids. A very special low friction packing recommended to be used with high speed pumps, agitator shafts, oils, solvents, ammonia solution, concentrated caustics and ketones. PH 2 - 12.

2

-2000 to +2900

A 100% pure PTFE packing impregnated with a special chemically inert suspensoid. A good packing for control valves, pumps handling corrosive gases, ammonia, foodsuffs and pharmaceuticals. It is an ideal packing for sealing dryers, mixers and agitators. Due to high tensile strength of the fibre, this packing is best suited to be used in high pressure valves and reciprocating pump applications. PH 0 - 14.

3

-2000 to +2900

A PTFE fibrous packing having special DUPLEX BRAID to increase dimensional stability treated with inert high temperature lubricant. This packing is safe, non-toxic and flexible for use on pumps, for concentrated acids, alkalies, oils, solvents and gases. PH 0 - 14

23

-2500 to +3000

A PUPLEX plaited flexible combination packing having super grade fluoropolymer intimately treated with graphite to enhance lubricity and heat dissipation. This packing is self lubricating mechanically strong and widely used in chemicals, petrochemicals, power plants, paper, pulp and food industries. PH 0 - 14.

36

-2400 to +3000

A graphite bonded fluoropolymer fibre packing DUPLEX BRAIDED to improve thermal conductivity and lubricity for maintaining extremely low friction, chemical resistance and reduces maintenance cost. Best suited to valve stems, centrifugal pumps, wood pulp, caustics, oils, solvents, acids and strong chemicals. This packing is widely used in Refineries, Petrochemicals and Fertilizer Industries. PH 0 - 14.